散射对高温气体-碳黑颗粒混合物辐射传输的影响

基于全光谱k分布(Full spectrum k distribution,FSK)模型、MIE理论和有限体积法(Finite volume method,FVM),构建了均温、均质辐射参与性气体-碳黑颗粒混合物介质热辐射传输模型,并分析了碳黑不同尺寸、不同体积浓度以及介质不同路径长度和不同温度条件下,因忽略碳黑颗粒散射所导致的介质热辐射传输特性(如辐射热流、辐射源项)的计算误差。研究结果表明:体积分数不变,增大粒径,计算误差呈现出先增大后减小的趋势;数密度不变,增大粒径,或者粒径不变,增大体积分数,均将使得计算误差相应增大;粒径、体积分数不变,增大路径长度,或者升高介质温度,均将增大计算误差。通常对于含有大颗粒、高碳黑浓度的辐射参与性气体-碳黑颗粒混合物介质,碳黑颗粒散射不能忽略。     

Modeling the effects of green alternative on heat island mitigation of a meso level town,West Bengal,India

Urban heat island (UHI) is emerged as a ubiquitous phenomenon that affects the outdoor thermal comfort. Hence urban microclimatic studies using numeric simulation software to find out adaption strategies are attracting the great attention of researchers and policymaker. Number of scientists carried out their research on this topic using different tools and technique whereas ENVI-met model is the most widely used simulation tools. The present study intended to examine the implication of green infrastructure of the town on enhanced microclimatic condition and to evaluate the best suitable mitigation strategy modelling cool city with ENVI-met software (V4). Five greening condition such as existing UHI condition (C1), 100% greening of roof (C2), 100% greening of roof and walls (C3), 50% greening of roof and walls (C4) and: Plantation at suitable area with 50% greening of roof and walls (C5) have been taken into consideration for the microclimate simulation for all three selected sites. Among these five conditions, C3 for the open mid-rise and compact low-rise, C5 for the open low-rise are identified as one of the most suitable strategies which can reduce the air temperature of peak hours by 2.6 °C, 1.33 °C and 1.87 °C respectively. These models are validated by simple linear regression between simulated and existing air temperature in case of existing UHI condition (C1) and in all the cases coefficient of determination value is high such as for open mid-rise, compact low-rise and open low-rise, it is 0.92, 0.92 and 0.75 respectively. Therefore it can be concluded that the application of those strategies can improve the urban thermal environment as well as the outdoor thermal comfort of English bazaar Town and its surroundings.     

R141b在圆形微通道内的沸腾换热实验研究

为提高换热强度、解决设备内部高热流密度散热问题,采用实验方法研究R141b在不同直径(D=0.5mm和1.0mm)水平圆形微通道内的沸腾换热特性,分析了热流密度(q=2.0kW/m~2～47.6kW/m~2)、质量干度(x=0～0.6)、质量流速(G=111.11kg/(m~2·s)～333.33kg/(m~2·s))的变化对平均传热系数h的影响,探究不同情况下影响沸腾换热的主导因素。实验研究表明:平均传热系数h随热流密度q的增加而减小,在不同范围内减小速率有明显差异;热流密度q=2kW/m~2～5kW/m~2时质量流速G对平均传热系数h影响较明显,热流密度较高时质量流速G对换热影响很小;在质量流速G=111.11kg/(m~2·s)～333.33kg/(m~2·s),质量干度x0.3时,平均传热系数h随质量干度x增加而明显下降,在设计微通道换热器时应尽量使R141b处于初始沸腾阶段以获得更好换热效果,并采取一定措施预防干度过高引起的换热恶化。     

运载火箭推进剂复杂流动传热问题数值模拟中的模型简化方法

在运载火箭改进优化或新型运载火箭设计过程中,会遇到各种复杂的流动与传热问题。按照真实产品和物理过程直接建立的数值计算模型过于复杂,不同尺度的结构、流动与传热、长时间的飞行过程相互耦合,出现计算时间太长(数年)、收敛困难、程序调试困难等问题。针对初始条件复杂、飞行过程复杂、边界条件复杂3类具体问题,总结了3种相应的模型简化方法,分别是工程经验法、极限参数法、低维近似法,为推进剂复杂流动与传热的数值模拟提供参考。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

General relativistic radiation hydrodynamics: Mixed-frame approach

I show how general relativistic 3D radiation hydrodynamic equations can be derived from the tensor formulation. Radiation quantities are differentiated with respect to the fixed coordinates while the interaction between matter and radiation is described by the comoving frame quantities. The formulation is covariant, and can be applied to any coordinates or spacetime; I show the derivation for the Schwarzschild spacetime as an example.     

基于蒙特卡罗法辐射传递系数的统计分析

文章基于蒙特卡罗方法定义了表面热辐射换热辐射传递系数的表达式,确定其概率分布和置信度水平并进行统计分析。推导封闭腔内辐射传递系数的相对和绝对误差公式,为求解辐射传递系数所需追踪射线数量提供参考依据。     

双功能陶瓷膜生物反应器处理污水的实验研究

针对目前膜生物反应器运行过程中膜易污染的问题，研制了一种新型的双功能陶瓷膜生物反应器．该生物反应器的主要特点是采用一种具有双重功能的陶瓷膜作为生物反应器的主要元件，陶瓷膜可以交替地进行曝气和过滤，将膜的在线反冲清洗和生物反应器的供氧曝气结合在一起．考察了不同运行条件下该反应器对COD、氨氮的去除效果．对陶瓷膜的充氧能力进行了实验，测得小孔陶瓷膜、大孔陶瓷膜、砂型曝气头的氧传递系数分别为：0．2315min-1，0．1587min-1，0．0991min-1．     

热惯性对热冲击半无限体热应力影响非傅立叶效应研究

考虑超快速加热引起传热过程的非傅立叶效应,基于线性热弹性理论和表面热惯性特性,建立了带惯性第一类边界条件的半无限体的动态温度场、热应力场方程组。用拉普拉斯变换法对方程组进行求解。结果表明,快速加热在半无限体内产生温度场和应力场,且热和应力呈波动输运机制。讨论了温升率或热惯性对半空间温度场和应力场的影响,比较弹性波波速与热波波速之比动态热应力的影响。     

高速CO2焊接过程稳定性分析

利用汉诺威焊接质量分析仪,检测CO2焊短路过渡过程的电参数信号,研究高速焊接情况下燃弧时间与短路过渡周期的变化规律,分析了高速CO2焊接过程中短路过渡各个电参数对焊接过程稳定性的影响。对短路与燃弧阶段的电流、电压波形进行分析,认为波形控制可以有效改善焊接过程的稳定性。